Sedelogic rolstoel kussen

The Sedelogic wheelchair cushion consists of 12 layers of a 3-dimensional woven polyester fibre. The top and bottom layers are made of an even softer fibre, because of the addition of 37% polyamide. This top layer has a thickness of 3 mm. Layers two and three both have a thickness of 7 mm. Next eight layers consist of a harder fibre, which gives the cushion its structure. The bottom layer has, as well as the top layer, a thickness of 3 mm.

The cushion is designed to support your body in an anatomical way, because of a specific cut of each layer. Furthermore, the Sedelogic wheelchair cushion ventilates because of the three dimensional structure of the separate layers.

Two strips of Velcro are attached to the bottom to affix the cushion to the wheelchair, if preferred.

Available sizes

Standard sizes 
Art.0111 XS -39cm x 39cm (2 orange straps)
Art.0211 S -44cm x 44cm (2 grey straps)
Art.0311 M -44cm x 49cm (2 red straps)
Art.0411 L -49cm x 49cm (2 purple straps)

Custom made
Art.0511 Handmade cushion (2 black straps)
Art.1311 PU inco cover

* Weight is approximately 1 kg
* Maximal user weight 110 kg, provided that user weight will match the cushion.
* In case of obesity a custom made cushion can be delivered.

Cleaning and desinfection 

Caution: do no steam or autoclave the cushion.
Avoid contact with chemicals as well. The cushion cannot withstand temperatures above 60 degree Celsius. These temperatures will change the material’s structure.

The cushion can be desinfected with diluted antibacterial and antiseptical agents. Make sure to clean the wheelchair cushion with water before and after cleaning with this agent. The cushion can be machine washed, provided the temperature will not cross 40 degree Celsius. Do not use a dryer or fabric softener.

Materials 

All layers are 100% polyester fibre, except for the top and bottom layer, which are made of 37% polyamide and 67% polyester fibre. Two strips of Velcro (alfatex), consisting of polyamide.

Glue: Technomelt (Q9268 Henkel)

Tests and flammability
DIN 7520/FMVSS 302,DIN ISO6941,BS5852, DIN 75200/FMVSS 302 EN 1012

Testing/reference
- Reduced tissue-interface pressure and increased comfort on a newly developed soft-layered long spineboard.
J Trauma. 2010 Mar;68(3):593-8. Hemmes B, Poeze M, Brink PR.
– Pressure tests: P. Schraven (Occupation therapist. Adelante, Hoensbroek).